RSS 2.0
Natural Seawater Mimicking
Login
Unknown user
Reference
Facebook
Alternative Picture
Seawater Analysis
Additives
Removers
Marine Salts
Animal Care
Lighting
Reef Construction
Filtration
Product Dosing
[MS] CS Marine Salt 2 Kg

Two component marine salt. Made of top-grade chemicals as a solid and liquid phase for extreme homogeneity and standard composition of seawater.



Composition
Solid phase:
- major elements
Liquid phase:
- minor and trace elements
- dissolved organic mater (DOM)
Dosage
Water amount : Resulting salinity:

20,8 l/kg : 1,0280 = Red Sea
25,0 l/kg : 1,0236 = Coral reef
26,0 l/kg : 1,0225 = Coral reef
27,0 l/kg : 1,0220 = Coral reef
29,5 l/kg : 1,0200 = Coral reef
58,0 l/kg : 1,0100 = Brackish waters

Add corresponding amount of water and mix at least 60 minutes (optimally 6 hours) before use. Then add 100 ml of liquid phase (CS Trace for Marine Salt) per 1 kg of salt.
Storage
Store on dry place at room temperature.
Safety
Keep away from children!
Warning
Not intended for freshwater tanks!
Customs Tariff Code
2501.0099


Type of priceAmountCurrency
Price displays after login You can register here

Version 2012-III

CS Marine Salt

Marine Salt

CS Marine Salt is the professional, 2-component marine salt of the highest commercially attainable purity, intended for reef tanks. Product guarantees the following benefits for made seawater:

  • Naturally identical composition
  • Perfect homogeneity
  • Highest commercially attainable purity

Composition

Solid Phase
Perfect
homogeneity
Salt 1
Makes up 91% of the product mass.
Purity
  • Base elements (NaCl)
  • Major elements
  • Selected minor elements
Liquid Phase
Salt 2
  • 3 minor elements
  • 24 trace elements
  • 6 noble metals in trace concentrations
  • 3 vitamins
  • 8 carbohydrates
  • 21 amino acids and their derivatives
  • 2 mixtures of complex acids
Bio-identical
ingredients
in natural
concentrations
Total
 
74 constituents for the best possible mimicking of the natural seawater

Specification

Two-component product - perfect homogeneity

Every batch of seawater made-up from CS Marine Salt must always have the same composition. This means that it must for instance contain Hydrogen (H) always at a concentration of 1,07 . 102 mol/l and Iridium (Ir) always at a concentration of 1,00 . 10-14 mol/l. With a 16-digit place difference between the most and least abundant element, the aforementioned state can be achieved in a one-component powdered supplement only theoretically.

 

Complete formulation - natural seawater mimicking

coral-shop product philosophy requires that the seawater produced from CS Marine Salt has a complete and bio-identical composition regarding dissolved inorganic matter (major, minor and trace elements), as well as dissolved organic matter (DOM). This may be achieved only with a use of a wide scale of bio-identical substances in correct concentrations.

 

Price - performance ratio

7 of 74 constituents of CS Marine Salt make up for 91% of the product mass (solid phase). Even with a relatively low impurity level of, e.g. heavy metals or organic compounds (<< 0,1%) any effort to mimic the natural seawater composition would lose its sense, especially as far as trace elements and DOM is concerned. The only plausible approach is attaining the highest possible commercially purity for those materials, contained in the CS Marine Salt solid phase. Therefore the price of the product corresponds to the priorities, quality and achieved results in reefkeeping practice.

Dosing

Solid phase:

1 kg

Liquid phase:

100 ml

Reverse osmosis water:

Volume [l] Density [kg/l] Corresponding biotope
21,5
1,028
Red Sea
24,0
1,025
Coral reef
25,0
1,024
26,0
1,023
27,0
1,022
TOPlist
Search
Contact us
Product Information
coral-shop
Bestsellers
Profi Plus Additives
Marine Line Additives
CS DispoPhos
Platinum Reef Additives
CS NitraClean
Test Kits
Animal Care Products
CS DeChlorAmm
Channel One Dosing
UM Removal Set
News
Most visited