RSS 2.0
Natural Seawater Mimicking
Login
Unknown user
Reference
Facebook
Alternative Picture
Products - Reef Construction
CS Reef Bonds
[REEFC] CS REEF BOND STS 2,5 kg
[REEFC] CS REEF BOND STG 0,5 + 0,2 kg
[REEFC] CS REEF CONSTRUCT Tool Set
CS Reef Construction Toola

Unique Stone-to-Stone and Stone-to-Glass harmless & animal-safe reef bonds


Version 2014-VIII

CS Reef Bonds

Unique Stone-to-Stone and Stone-to-Glass harmless & animal-safe reef bonds

CS REEF BOND STS

CS REEF BOND STG

STS STG

Stone-to-Stone

Strong reef stones and ceramic bonding.

Stone-to-Glass

Strongly bonds reef stones and ceramic to glass.

 

CS REEF BOND STS

Not indended for underwater work!

Key advantages

  • One-component product
  • Water-dilutable
  • 100% water resitant
  • 45 minutes spreadable time
STS

Basic Instruction

  • Remove any free particles and dust from bonded surfaces
STS STS STS
  • Repeatedly moisten the bonded surfaces
  • Add small amount of water into the CS REEF BOND STS and mix well
  • Repeat until paste-consistency bond forms
STS STS STS
  • Apply bond on one surface in a thickness of 1 cm or more and press both surfaces together
  • Fix the stones and let the joint harden at least 48 hours - then the quality of joint increases in time
 

CS REEF BOND STG

Not indended for underwater work!

 

Key advantages

  • Two components ready to mix together
  • 100% water resitant
  • Permanent 40% elasticity
  • Hold-down force up to 1,7 MPa
  • 60 minutes spreadable time
STG ASTG A

Basic Instruction

  • Perfectly clean the glass from any dirt and grease
STG STG STG STG
  • Make the bonded surface of the stone even and remove any free particles and dust *
  • CS REEF BOND STG
    • Prepare desired amount of component B (liquid) into the bowl
    • Add small amount of component A (powder) and mix well
    • Repeat until paste-consistency bond form
    • Up to the 10% of water can be added if needed
STG STG STG
  • Apply bond on surface of the stone in a thickness of 1 - 2 mm
  • Firmly press the stone on the glass and fix it properly
  • Let the joint harden at least 48 hours

* If stone has too many cavities, fill them up with CS REEF BOND STS and wait 48 hours

 
TOPlist
Search
Contact us
Product Information
coral-shop
Bestsellers
Profi Plus Additives
Marine Line Additives
Test Kits
CS DispoPhos
CS NitraClean
Platinum Reef Additives
CS Marine Salts
Animal Care Products
CS DeChlorAmm
Channel One Dosing
News
Most visited